Detailed Product Description

ESD Floor

ARMEKA ESD/STB Epoxy Coating Flooring

ESD/STB epoxy coating flooring is well know around the world. It is one of very few products around the world able to fully meet the rigorous demands for electric conductive properties according to the standards set by International ESD norm IEC 61340-5-1/2.

Furthermore, this product has been developed to withstand the heaviest traffic of almost all kinds. Its compression strength and tensile strength is several times higher than any concrete used for floors in factories or eleswhere. That makes this coating the ultimate choice for areas exposed to high mechanical impact and which require the most demanding ESD protection.

Suitable areas for ESD/STB

In the Electronics Industry or other areas where the final floor is expected to withstand heavy traffic in combination with excellent ESD protection. For areas with less demanding mechanical impact and with lighter traffic, other Armeka epoxy coatings are available which will provide the most suitable cost-performance balance.

ESD SPECIFICATIONS

ESD norm                        IEC(EN)61340-5-1/2

Resistance to ground        Less than 10MΩ

System resistance            Less than 35MΩ

Body charge, walking test  Less than 100 volts

GENERAL SPECIFICATIONS

Normal thickness                3mm, but can increased according to demands

Color                                  Standard Dark grey, also other colours available.The color of the floor can be changes by mixing black sand with any other primary color

Surface structure                 Slightly anti-slip

Mechanical properties          Presented upon request

Chemical resistance            Presented upon request

Cleaning instrustions

The floor can be cleaned by a variety of methods: including by brushing machines, mopping, sweeping or vacuuming. Alkaline cleaning agents may be used if necessary.

Oil sports can be removed by using degreasing agents.Suggestions will be provided as to the actual cleaning methods most suitable for the client's local conditions.

Working hygiene environment

ESD/STB is free from solvents and nearly odour free during application. It is entirely non-flammable. The main precautions is that workers  should protect their bare skin from contact with the product before it is used.

Note

If ESD/STB is to be used on older existing floors specific pre-treatment will be required. Each floor must be assessed by an export to determine the appropriate preparation work needed. For a prompt reply regarding our products and their application in your premise please direct your questions to us or our authorized contractors.