Detailed Product Description

SL ESD Floor

ARMEKA ESD/SL Epoxy Coating Flooring

ARMEKA ESD/SL is a solvent free, smooth, durable glossy epoxy coating.

It is formulated to fully meet the rigorous demands for electric conductive properties according to the standards set by International ESD norm IEC 61340-5-1/2.

Furthermore, this coating has been developed to withstand medium heavy traffic.

Due to the smooth non-porous surface cleaning is easy.The system consits of a normal epoxy primier to seal the substrate, a conductive primer and a self leveling conductive layer in decided thickness.

Suitable areas for ARMEKA ESD/SL

ARMEKA ESD/SL is developed to be used in areas with extremely high demands for cleaning ability in combination with electrical conductivity.

Those areas can be found in the Electronics Industry, Pharmaceutical industry (clean rooms) or in areas where static electricity can cause explosions.

ESD SPECIFICATIONS

ESD norm                                  IEC(EN) 61340-5-1/2

Resistance to ground                  Less than 10MΩ

System resistance                      Less than 35MΩ

Body charge, walking test           Less than 100 volts

GENERAL SPECIFICATIONS

Normal thickness                         1.0-1.5mm

Color                                           Grey, color variations possible

Surface structure                         Smooth

Mechanical properties                   Presented upon request

Chemical resistance                     Presented upon request

Cleaning instructions

The floor can be cleaned by a variety of methods; including by brushing machines, mopping, sweeping or vacuuming. Alkaline cleaning agents may be used if necessary.

Oil sports can be removed by using degreasing agents. Suggestions will be provided as to the actual cleaning mothods most suitable for the client's local conditions.

Working hygiene environment

ESD/SL is free from solvents and nearly odour free during application. It is entirely non-flammable. The main precautions is that workers should protect their bare skin from contact with the product before it is used.

Note

If ESD/SL is to be used on older existing floors specific pre-treatment will be required. Each floor must be assessed by an export to detemine the appropriate preparation work needed. For a prompt reply regarding our products and their application in your premises please direct yours questions to us or our authorized contractors.